REVERSIBLE AIRLESS Spray Gun TIPS

Description Sagola Reversible Airless Tips Dial in your finish with genuine Sagola reversible airless tips. Available from 0.007″–0.035″ and 20°–80° fan angles, these tips cover fine finishes, basecoats/primers, high-viscosity coatings, and thick build applications. Each size provides a predictable spray width @ 30 cm and a known flow rate @ 100 bar for fast setup and repeatable, professional results. Fast selection: Intuitive codes (e.g., 07/20, 11/60, 21/80, 35/60) map orifice fan angle for quick matching to material and part size. Reliable output: Flow range from ~0.18–4.30 lpm and widths from ~100–457 mm to hit target film build and speed. RAC-compatible: Works with common reversible tip guards for quick flip-to-clear and minimal downtime. Clean atomization: Pair with PSAM 500 gun filters (50–200 mesh) to reduce clogs and keep patterns consistent. How to choose: Select the smallest orifice that maintains your target flow, then choose a fan angle that fits the part geometry and overlap technique. Use the tip size chart below to confirm spray width and flow before adding to cart. Application Reversible Tip Nozzle Spray Angle Spray width @ 30 cm Flow @ 100 bar (1450 psi) Part Number Product Filter Finishes Finishes 07/20 0.18 mm (0.007″) 20° 100–150 mm (4–6″) 0.18 lpm PT81461102 Red Finishes 07/40 0.18 mm (0.007″) 40° 200–250 mm (8–10″) 0.18 lpm PT81461103 Red Finishes 07/50 0.18 mm (0.007″) 50° 250–300 mm (10–12″) 0.18 lpm PT81461104 Red Finishes 09/20 0.23 mm (0.009″) 20° 100–150 mm (4–6″) 0.25 lpm PT81461105 Red Finishes 09/40 0.23 mm (0.009″) 40° 200–250 mm (8–10″) 0.25 lpm PT81461106 Red Finishes 09/60 0.23 mm (0.009″) 60° 300–355 mm (12–14″) 0.25 lpm PT81461107 Red Finishes 11/20 0.28 mm (0.011″) 20° 100–150 mm (4–6″) 0.37 lpm PT81461108 Red Finishes 11/40 0.28 mm (0.011″) 40° 200–250 mm (8–10″) 0.37 lpm PT81461109 Red Finishes 11/60 0.28 mm (0.011″) 60° 300–355 mm (12–14″) 0.37 lpm PT81461110 Red Basecoats & Primers Basecoats & Primers 13/20 0.33 mm (0.013″) 20° 100–150 mm (4–6″) 0.57 lpm PT81461111 Red Basecoats & Primers 13/40 0.33 mm (0.013″) 40° 200–250 mm (8–10″) 0.57 lpm PT81461112 Red Basecoats & Primers 13/80 0.33 mm (0.013″) 80° 405–457 mm (16–18″) 0.57 lpm PT81461114 Red Basecoats & Primers 15/20 0.38 mm (0.015″) 20° 100–150 mm (4–6″) 0.72 lpm PT81461115 Yellow Basecoats & Primers 15/40 0.38 mm (0.015″) 40° 200–250 mm (8–10″) 0.72 lpm PT81461116 Yellow Basecoats & Primers 15/80 0.38 mm (0.015″) 80° 405–457 mm (16–18″) 0.72 lpm PT81461118 Yellow High Viscosity Products High Viscosity 17/20 0.43 mm (0.017″) 20° 100–150 mm (4–6″) 0.98 lpm PT81461123 Yellow High Viscosity 17/40 0.43 mm (0.017″) 40° 200–250 mm (8–10″) 0.98 lpm PT81461124 Yellow High Viscosity 17/60 0.43 mm (0.017″) 60° 300–355 mm (12–14″) 0.98 lpm PT81461125 Yellow High Viscosity 17/80 0.43 mm (0.017″) 80° 405–457 mm (16–18″) 0.98 lpm PT81461126 Yellow High Viscosity 18/20 0.45 mm (0.018″) 20° 200–250 mm (8–10″) 1.10 lpm PT81461127 Yellow High Viscosity 18/40 0.45 mm (0.018″) 40° 200–250 mm (8–10″) 1.10 lpm PT81461128 Yellow High Viscosity 18/60 0.46 mm (0.018″) 60° 300–355 mm (12–14″) 1.10 lpm PT81461129 Yellow High Viscosity 19/20 0.48 mm (0.019″) 20° 100–150 mm (4–6″) 1.30 lpm PT81461132 White High Viscosity 19/40 0.48 mm (0.019″) 40° 200–250 mm (8–10″) 1.30 lpm PT81461133 White High Viscosity 19/60 0.48 mm (0.019″) 60° 300–355 mm (12–14″) 1.30 lpm PT81461134 White High Viscosity 19/80 0.48 mm (0.019″) 80° 405–457 mm (16–18″) 1.30 lpm PT81461135 White High Viscosity 21/20 0.53 mm (0.021″) 20° 100–150 mm (4–6″) 1.52 lpm PT81461137 White High Viscosity 21/40 0.53 mm (0.021″) 40° 200–250 mm (8–10″) 1.52 lpm PT81461138 White High Viscosity 21/60 0.53 mm (0.021″) 60° 300–355 mm (12–14″) 1.52 lpm PT81461139 White High Viscosity 21/80 0.53 mm (0.021″) 80° 405–457 mm (16–18″) 1.52 lpm PT81461140 White Thick Coats Thick Coats 23/20 0.58 mm (0.023″) 20° 100–150 mm (4–6″) 1.83 lpm PT81461142 White Thick Coats 23/40 0.58 mm (0.023″) 40° 200–250 mm (8–10″) 1.83 lpm PT81461143 White Thick Coats 23/60 0.58 mm (0.023″) 60° 300–355 mm (12–14″) 1.83 lpm PT81461144 White Thick Coats 23/80 0.58 mm (0.023″) 80° 405–457 mm (16–18″) 1.83 lpm PT81461145 White Thick Coats 25/20 0.63 mm (0.025″) 20° 100–150 mm (4–6″) 2.13 lpm PT81461147 White Thick Coats 25/40 0.63 mm (0.025″) 40° 200–250 mm (8–10″) 2.13 lpm PT81461148 White Thick Coats 25/60 0.63 mm (0.025″) 60° 300–355 mm (12–14″) 2.13 lpm PT81461149 White Thick Coats 25/80 0.63 mm (0.025″) 80° 405–457 mm (16–18″) 2.13 lpm PT81461150 White Thick Coats 27/20 0.68 mm (0.027″) 20° 100–150 mm (4–6″) 2.50 lpm PT81461152 White Thick Coats 27/60 0.68 mm (0.027″) 60° 300–355 mm (12–14″) 2.50 lpm PT81461154 White Thick Coats 27/80 0.68 mm (0.027″) 80° 405–457 mm (16–18″) 2.50 lpm PT81461155 White Thick Coats 31/40 0.78 mm (0.031″) 40° 200–250 mm (8–10″) 3.42 lpm PT81461163 White Thick Coats 31/60 0.78 mm (0.031″) 60° 300–355 mm (12–14″) 3.42 lpm PT81461164 White Thick Coats 31/80 0.78 mm (0.031″) 80° 405–457 mm (16–18″) 3.42 lpm PT81461165 White Thick Coats 35/20 0.89 mm (0.035″) 20° 100–150 mm (4–6″) 4.30 lpm PT81461181 White Thick Coats 35/40 0.89 mm (0.035″) 40° 200–250 mm (8–10″) 4.30 lpm PT81461182 White Thick Coats 35/60 0.89 mm (0.035″) 60° 300–355 mm (12–14″) 4.30 lpm PT81461183 White Filter legend: Red (200 mesh)  | Yellow (100 mesh)  | White (50 mesh) PSAM 500 Spray Gun PSAM 103 Spray Gun